(281) 957-5283

RDI on google+

We accept Visa, Mastercard, American Express and PayPal.

Subscribe to Our Newsletter

(Your shopping cart is empty)

  Home > Balancing >

DigivibeMX M10 Single and Two Plane Dynamic Balancer
DigivibeMX M10 Single and Two Plane Dynamic Balancer
Our Price: $3,695.00

Product Code: EI-DIGIVIBEMX-M10


Erbessd DigivibeMX M10 2 Plane Dynamic Balancing Analyzer with Wizard

A complete and useful Dynamic Balancing System

The DigivibeMX M10 is the Dynamic Balancing System with more functions in the market. It is built with an intuitive interface and designed also for the most demanding users.

1 & 2 Plane Dynamic Balancing

DigivibeMX M10 contains tools and formulas for in situ balancing as well as for balancing machines. With a single click you can start balancing; forget about machine dimensions, limits, quality grade, these parameters will be asked only if needed. Thanks to its automated tracking filter, the system identifies the RPM in a selected range to avoid inaccuracies in case of slightly changes of speed.

The balancing speed range varies from 60 to 150,000 RPM with signal recording times of up to 5 minutes and the balancing formulas can be used by users with minimal knowledge in the dynamic balancing field, as it has a very intuitive platform as well as a tutorial video and an operation manual.

FFT Spectra

Most of spectral tools in DigivibeMX M10 are based on the FFT algorithm, with a frequency range capable of measuring low speed (1 Hz) up to speeds of 10 kHz. The accuracy of the spectrum varies according to the needs, reaching many millions of resolution lines. Its main purpose is to transform the signal from its time-domain representation to the frequency-domain representation, in order to identify different phenomena such as harmonics, electrical noise, etc.

Dynamic Balancing

Balancing Tool with Soft Bearing Suspension mode
Easy-to-use function designed to perform balancings on the field as well as on balancing machines. The system uses a tracking filter to identify the RPM in a specified range so small changes on the speed dont affect the balancing process. Balancing speed range: 100 120,000 RPM in a very intuitive interface.

Polar Graphics

Polar graphics are visual representations of the balancing vector positions. They are useful for locating the correction masses.

Balancing Calculator

DigivibeMX M10 has many balancing tools, including:

  • Single plane balancing calculator
  • 2 plane balancing calculator
  • Serial balancing
  • Residual unbalance
  • Balancing quality grade calculator
  • Split weights
  • Combine weights
  • Drill depth
  • Plate size
  • Trial mass calculator
  • Radius change

Bode Diagram

Automatic Balancing Report

DigivibeMX M10 is able to generate automatic balancing reports on Microsoft Word*, so it is very easy to edit them. It includes:

  • Values for each run are set in a table
  • Evolution trend of the balancing process in RMS and filtered values
  • FFT cascade for each plane
  • Time domain signals in a cascade format for each plane
  • Polar graphs
  • Final Spectrum

ASCII Compatibility

This format produces a file in text format in which all channels are saved in columns. It does not have header and can be set according to the users needs.

  • Column Y Channel 1
  • Column X [Separator]* Column Y Channel 1
  • Column X [Separator]* Column Y Channel 1 [Separator] * Column Y Channel 2

* Separator can be defined by the user

What's In The Box

  • (1) 2-Channel Interface
  • (1) Accelerometer
  • (1) Laser Optical Sensor
  • (1) Calibrator
  • (1) Case
  • (1) Magnetic base
  • (1) Cable
  • (1) Installation CD
  • (1) User Manual
Two Channel Interface
One Accelerometer
Laser Optical Sensor
One Cable for Optical Sensor and Calibrator
Case & Magnetic Base
Installation CD & User Manual

DigivibeMX M10 Software System requirements

  • Intel Celeron (1.60GHz / 400MHz FSB) or higher
  • 1GB RAM DDR2 or higher
  • Windows Vista or higher (works on Windows 8.1* and Windows 10)
  • SVGA display or higher (touch enabled displays are supported)
  • 300 MB minimum free hard disk space
  • USB Port


2 Channel Interface

4-pin connectors (I, II, B):for 24V Accelerometers
5-pin connector (Op):for Optical Sensor
Selector button:(Ch 1 / Ch 2)
Connector:Cable with USB connector (15cm)
Weight:200 grams
Dimensions (mm):
60(D) x 90(W) x 30(H)

Max impact shock:
1000 gs peak
Freq. response (+/- 3dB):0.32 15000 Hz
Freq. response (+/- 5%):2 - 10000 Hz
Sensitivity:100 mV/g +/- 10%
Transverse Sensitivity:
< 5%
Power Supply:
18-30 V / 3-8 mA
Short-circuit protection
Operating Temperature:
−10C to 50C
Protection Grade:
IP 67, III
Impact Resistance:
IEC 60028-27
Integrated cable with 4-pin connector (2m/6ft)
15 grams
Stainless steel body and Magnetic base
Optical Sensor

Analog Output
1 to 5000 Hz
Power Supply:
3.5 to 7V
20 to 30mA
Voltage Drop:
<0.4 V
Short circuit, Reverse current and Over-Voltage protection (15V for 1 minute)
Operating Temperature:
−10C to 50C
Protection Grade:
Impact Resistance:
IEC 60028-27
Operatin Distance:
28 grams
Aluminum and includes Magnetic Base

Accessories for this product...
EI-Accelerometer with Magnetic Base and 2 meter cable
Our Price: $590.00

EI-Accelerometer with Magnetic Base

Browse for more products in the same category as this item:

Balancing > Balancing Instruments
Reliability Direct, Inc.
900 W. Main Street
Ephrata, PA 17522
 Contact Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback