Home > Lubrication > Lubricants and Grease >

SKF LGET 2 Extreme Temperature Bearing Grease
SKF LGET 2  Extreme Temperature Bearing Grease
 
LGET 2 is a premium quality, synthetic fluorinated oil based grease using a PTFE thickener. It has excellent lubrication properties at extremely high temperatures exceeding 200 °C (392 °F) up to 260 °C (500 °F).
  • Long life in aggressive environments such as very reactive environments or areas with a presence of high purity gaseous oxygen, hexane and so on
  • Excellent oxidation resistance
  • Good corrosion resistance
  • Excellent water and steam resistance


Item# Item Name Our Price Qty Add
SKF-LGET 2/0.05 SKF LGET 2/0.05 LGET 2 Grease 50g (25ml) Syringe
$96.06
SKF-LGET-2-1 SKF LGET 2/1 LGET 2 Grease 1 kg Can
$1,190.79
Check the items you wish to purchase, then click


:

LGET 2 is a premium quality, synthetic fluorinated oil based grease using a PTFE thickener. It has excellent lubrication properties at extremely high temperatures exceeding 200 °C (392 °F) up to 260 °C (500 °F).

This grease offers:

  • Long life in aggressive environments such as very reactive environments or areas with a presence of high purity gaseous oxygen, hexane and so on
  • Excellent oxidation resistance
  • Good corrosion resistance
  • Excellent water and steam resistance

Available pack sizes

  • 50 g (25 ml) syringe
  • 1 kg can

Technical data

  • DIN 51825 code : KFK2U-40
  • NLGI consistency class : 2
  • Soap type : PTFE
  • Colour : whitish cream
  • Base oil type : synthetic (fluorinated polyether)
  • Operating temperature range, °C (°F) : -40 to 260 (-40 to 500)
  • Dropping point DIN ISO 2176, °C (°F) : >300 (572)
  • Base oil viscosity
    • 40 °C, mm2/s : 400
    • 100 °C,mm2/s : 38
  • Penetration DIN ISO 2137
    • 60 strokes, 10-1 mm : 265-295
    • 100,000 strokes, 10-1 mm : -
  • Mechanical stability
    • Roll stability, 50 hours at 80 °C, change 10-1 mm : ±30 max. (130 °C/266 °F)
    • Roll stability, 72 hours at 100 °C, change 10-1 mm : -
    • SKF V2F test : -
  • Corrosion protection SKF Emcor:
    • standard ISO 11007 : 0 - 1
    • water washout test : -
    • salt water test (100% seawater) : -
  • Water resistance
    • DIN 51 807/1, 3 hrs at 90 °C : 1 max.
  • Oil separation
    • DIN 51 817, 7 days at 40 °C, static, % : 2 - 3
  • Lubricating ability
    • SKF R2F, running test B : -
  • Copper corrosion
    • DIN 51 811, 100 °C : 1 (150 °C/300 °F)
  • Rolling bearing grease life
    • SKF R0F test L50 life at 10 000 rpm, hrs : >700, 5600 rpm at 220 °C (428 °F)
  • EP performance
    • Wear scar, DIN 51350/5, 1400 N, mm : -
    • 4 ball test, welding load, DIN 51350/4 : 4000 min.
  • Designation : LGET 2/0.05

Important note:
Fluorinated greases in general are very costly, however LGET 2 is competitively priced. Given that LGET 2 is more expensive than other SKF greases, it is therefore recommended to use it only for applications where other SKF greases would not provide the required performance.





Browse for more products in the same category as this item:

Lubrication > Lubricants and Grease