Fluke TI200 60HZ Thermal Imager
A new generation of tools with next generation performance.
This trio of new Fluke infrared cameras is equipped with LaserSharp TM Auto Focus. Yes, there are other auto focus systems on the market but Fluke took it one step further so you get in-focused images, Every. Single. Time. Every infrared camera user knows that focus is the single most important thing to ensure when conducting an infrared inspection. Without an in-focus image temperature measurements may not be accurate and its much easier to miss a problem. LaserSharp auto focus tells you exactly where you are focusing. It uses a laser to calculate the distance to your target before it focuses. Place the red laser dot on the object you are inspecting, then pull and release the trigger for a perfect in-focus image.
SmartView ฎ Mobile App
Bring your office to your inspection site with the SmartView Mobile App. Create an inspection report on site and communicate directly to your client or manager via your Apple ฎ iPhone ฎ or iPad ฎ.
Optimize: Adjust the image to present problems in the most effective way.
Analyze: Use markers and other tools to quantify the severity of problems.
Communicate: Share inspection results by emailing images or reports to:
- Plan next steps or gain approval for work done before you even leave the job site
- If needed, get assistance analyzing the problem : Fluke SmartView Mobile will increase the return on your infrared camera investment.
LaserSharp Auto Focus
Potential problems hide behind incorrect readings; LaserSharp Auto Focus garentees crisp, sharp images every, single time. If your image is out of focus, temperature measurements could be off by up to 20 degrees or more. Getting crisp images in manual focus takes time and careful attention. With LaserSharp Auto Focus, you get an in-focus image of your designated target with the push of a button. The built-in laser distance meter instantly calculates and displays the distance to your target, and the focus engine immediately adjusts the focus.
Fluke SmartView Software
Powerful, modular suite of software tools for viewing, annotating, editing and analyzing infrared images
Generate fully customizable and professional-looking reports in a few easy steps
Full support of IR-Fusion Technology lets you edit images in five viewing modes
Easy to use, yet delivers high-end analysis performance
Image Viewing and Editing
Display array of open images for convenient selection and analysis
Scroll across images to display temperature at any given point
Edit color palettes, reference images, markers and emissivity
Extensive Annotation Possibilities
Organize data with extensive annotations
Add annotations (text comments) to images and reports
Input information such as locations, category and other notes
Referenced images can be linked for good/bad and before/after analysis
Detailed Analysis and Total Image Control
Alter level, span and palette selection to enhance contrast or display detail more effectively
Unlimited standard and user-defined analysis markers
Five viewing modes allows you to choose best images
Simplified Report Generation
Generate professional, customized reports fast
One-click standardized report generation for quick results
Choice of features including before/after, IR plus visible light, annotations, supporting data, graphics and charts
Report wizard guides user through report generation
- Thermal imager with standard infrared lens;
- Ac power supply and battery pack charger (including mains adapters); two, rugged lithium ion smart battery packs
- Micro SD memory card with SD adapter
- USB cable
- HDMI video cable
- SmartView ฎ software via download
- Rugged, hard carrying case
- Soft transport bag
- Adjustable hand strap
- Warranty registration ca