Home > Bearing Tools > Bearing Pullers >

SKF TMBS E Series - Strong Back Pullers
SKF TMBS E series - Strong back pullers
 

Easy bearing dismounting even in the tightest spaces

  • Dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach
  • Hydraulic and Mechanical versions available


Item# Item Name Our Price Sale Price Qty Add
SKF-TMBS 50E SKF TMBS 50E - Mechanical strong back puller
$347.65
SKF-TMBS 100E SKF TMBS 100E - Advanced hydraulic strong back puller
$965.38
SKF-TMBS 150E SKF TMBS 150E - Advanced hydraulic strong back puller
$1,299.66
$ 1,241.13
Check the items you wish to purchase, then click


:

Easy bearing dismounting even in the tightest spaces

The SKF TMBS E strong back pullers facilitate dismounting of bearings in applications where the use of traditional jaw pullers is restricted due to lack of space or where the application demands a long reach. TMBS 100E and the TMBS 150E are equipped with a hydraulic spindle, which allows for effortless application of force up to 100 kN (11.2 ton US). The TMBS 50E is equipped with a mechanical spindle for force generation.

  • Special separator design allows the puller to be easily inserted between the bearing and the shoulder on the shaft, even in the tightest spaces
  • The firm grip behind the bearing's inner ring reduces the force required to dismount the bearing
  • High load rating of 100 kN (11.2 ton US) make the TMBS 100E and TMBS 150E suitable for use in many applications
  • TMBS 100E and TMBS 150E offer complete hydraulic puller kits, allowing effortless generation of force
  • The extension rods of the TMBS 100E and TMBS 150E allow easy and quick adaptation to required pulling length
  • Maximum reach of 825 mm (32.5 in) and maximum shaft diameter of 150 mm (6 in) allow the TMBS E series to be used in many applications
  • The hydraulic spindle is equipped with a safety valve, which limits the applied force to 100 kN (11.2 ton US), minimizing the risk of puller overload
  • The spring-loaded center point of the hydraulic spindle allows easy centering of the puller on the shaft without damaging it
  • Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
  • Pumping mechanism used for force generation is effortless and more efficient than turning mechanism
  • Extension pieces of the hydraulic spindle allow quick adaptation to pulling length

Technical data

  • TMBS 50E
    • Contents:
      • 1 x separator set
      • 1 x mechanical spindle
      • 1 x beam
      • 2 x main rods
    • Nominal working force: 30 kN (3.4 US ton force)
    • Maximum reach: 110 mm (4.3 in)
    • Shaft diameter range: 7 - 50 mm (0.3 - 2 in)
    • Maximum torque (T): 70 Nm (50 lbf ft)
    • Spindle Hexagon head (AF): 19 mm (0.8 in)
    • Weight: 1.8 kg (4 lb)
    • Carrying case dimensions: 295 x 190 x 55 mm (11.6 x 7.5 x 2 in)
  • TMBS 100E
    • Contents:
      • 1 x separator set
      • 2 x main rods
      • 2 x extension rods, 125 mm (4.9 in)
      • 4 x extension rods, 285 mm (11.2 in)
      • 1 x beam
      • 1 x hydraulic spindle TMHS 100
      • 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in)
      • 1 x nose piece with centre point for hydraulic spindle
    • Maximum stroke: 80 mm (3.1 in)
    • Nominal working force: 100 kN (11.2 US ton force)
    • Maximum reach: 825 mm (32.5 in)
    • Shaft diameter range: 20 - 100 mm (0.8 - 4 in)
    • Cycle life hydraulic cylinder Minimum 5000: cycles up to 100 kN (11.2 US ton force)
    • Threading hydraulic cylinder: UN 1«'' x 16 tpi
    • Safety valve setting hydraulic cylinder: 105 kN (11.8 US ton force)
    • Weight: 13.5 kg (29.8 lb)
    • Carrying case dimensions: 580 x 410 x 70 mm (23 x 16 x 2.8 in)
  • TMBS 150E
    • Contents:
      • 1 x separator set
      • 2 x main rods
      • 2 x extension rods, 125 mm (4.9 in)
      • 4 x extension rods, 285 mm (11.2 in)
      • 1 x beam
      • 1 x hydraulic spindle TMHS 100
      • 2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in)
      • 1 x nose piece with center point for hydraulic spindle
    • Maximum stroke: 80 mm (3.1 in)
    • Nominal working force: 100 kN (11.2 US ton force)
    • Maximum reach: 825 mm (32.5 in)
    • Shaft diameter range: 35 - 150 mm (1.4 - 6 in)
    • Cycle life hydraulic cylinder Minimum 5000 cycles: up to 100 kN (11.2 US ton force)
    • Threading hydraulic cylinder: UN 1«'' x 16 tpi
    • Safety valve setting hydraulic cylinder: 105 kN (11.8 US ton force)
    • Weight: 17 kg (37.5 lb)
    • Carrying case dimensions: 580 x 410 x 70 mm (23 x 16 x 2.8 in)




Browse for more products in the same category as this item:

Bearing Tools > Bearing Pullers
Bearing Tools