The tool to monitor the mounting of SensorMount bearings

The SensorMount Indicator TMEM 1500 provides a direct reading of the fit of a SensorMount bearing mounted on a tapered seating. The SensorMount Indicator is only compatible with SKF bearings, which are fitted with the SensorMount sensor. These bearings from SKF have designation suffixes ZE, ZEB, or ZEV, e.g. ZE 241/500 ECAK30/W33. The SensorMount Indicator provides a numeric value, which guides the user in achieving a reliable bearing fit.SKF bearings fitted with the SensorMount system can also be mounted on adapter sleeves, withdrawal sleeves and hollow shafts. The material composition of the shaft has no effect on the proper operation of the SensorMount system.

• What you see is what you get; directly indicates the real reduction in internal bearing clearance
• Easy to use
• Fast
• Reliable Simplifies the mounting process:
  • No calculations needed
  • Makes feeler gauges obsolete
  • Minimises the risk of human errors

Technical data

• Range of measurement: 0 to 1.500 o/oo
• Power supply: 9-volt alkaline battery, type IEC 6LR61
• Battery life: 8 hours, continuous use
• Low battery warning: display shows "batt"
• Auto shut-off: after 30 minutes of inactivity
• Display: 4-digit LCD with fixed decimal
• Operating temperature range: -10°C to 50°C (14 °F to 122 °F)
• Accuracy: +/- 1%, +/- 2 digits
• IP rating: IP 40 Weight : 250 g (8.75 oz.)
• Size: 157 x 84 x 30 mm (6.1 x 3.3 x 1.8 in)
• SensorMount is a registered trademark of SKF Group