Quick and Easy-to-Use Dwyer® Combustion Test Kit.
Measure all four factors that govern overall efficiency: CO2 content, draft, stack temperature and smoke. Accuracy to ±1/2%CO2 fully meets the requirements of the professional Heating Engineer. Yet an apprentice can follow the simple, illustrated step-by-step instructions. Add a small pitot tube, which will fit into the kit case, for air velocity measurements.
(1). New easy-to-carry, impact resistant polyethylene Carrying Case with handle.
(2). No. 1101 CO2 Indicator — Clear acrylic plastic, virtually unbreakable.
(3). Aspirator Bulb, Filter and Tubing Assembly.
(4). Filter Wool — Extra supply in bag for about 1000 tests.
(5). No. 171 Draft Gage — Continuously indicating, permanently accurate. 0 to .25" W.C. range in .01 divisions.
(6). Dwyer® Smoke Gage Pump — Fast-working, the first known unit to conform with ASTM D-2156-XX standards
for testing smoke density in flue gases.
(7). Smoke Filter Paper — An exclusive Dwyer development.
(8). Magnehelic® Gage — 0-.25" W.C. and 300 to 2000 FPM. Included in Model 1200-B kit below.
(9). Awl — Pierces smoke pipe for thermometer and sampling tubes.
(l0). CO2 Absorbent Solution — Extra supply for many tests.
(11). No. A-503 Stack Thermometer — Dial type, stainless steel 200 to 1000°F˚.
(12). Gage Oil — Long-lasting extra supply.
(13). Spring Holders — For thermometer and terminal tubes.
(14). Hole Plugs — Packet to fill awl holes.
( l5). Smoke Chart — Laminated plastic, for comparison with samples taken.
(16). Dwyer® Combustion Efficiency Slide Rule Computer — Simple to operate.
(17). Operating Instructions — Simple, illustrated. Show step by-step use.
(18). Combustion Data Cards and Parts List — Plastic, weighs only 6 lb 8 oz.
Also includes portable Dwyer® Magnehelic® Draft Gage with large 4" dial instead of No. 171 Inclined Draft Gage, 0 to .25" W.C. range in .01" divisions. Also has air velocity scale with 300 to 2000 F.P.M, range. No leveling necessary; no gage oil required.
