Adjustable To 30V/3A With Fixed 5V And 12V Outputs

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

Adjustable To 30V/3A With Fixed 5V And 12V Outputs

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

THIS PRODUCT HAS BEEN DISCONTINUED

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting
• High load/line regulation
• Low noise/ripple
• Banana plug output terminals
• Complete with power cord

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting
• High load/line regulation
• Low noise/ripple
• Banana plug output terminals
• Complete with power cord

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

The CMCP515 Series Power Supplies have a 24 VDC Output and are DIN Rail mounted. They are recommended for use with the CMCP500 and CMCP420VT Series Transmitters and Monitors as well as -24 VDC Proximity Probe Systems.

The Extech DCP36 power supply has 80W constant power topology and has autoranging Voltage and Current output. This compact and lightweight unit provides easy portability, and is ideal for tight workbenches with limited space. It features 4-Digit LED displays, 3-programmable presets, front/rear output terminals, and remote sensing for accurate applied voltage at load point.

Features:

• 80W Constant Power Topology with 0.5 to 36V and 0 to 5A autorange output
• Dual 4-digit LED displays with 10mV and 10mA resolution
• Lower display indicates Current or Watts
• Constant Voltage or Current
• 3 user programmable presets for frequently used settings
• Upper voltage and current limit setting to protect UUT (Unit Under Test)
• Output on/off switch with Power Up Output On or Off status setting
• Remote Sensing for accurate applied voltage at the load point
• Front/Rear output terminals
• Lock/Unlock front panel
• Parallel connection to other units for Master/Slave control
• Compact slim tower housing is ideal for tight work bench
• Lightweight for easy portability
• Complete with RJ11 cable, alligator clip test leads, an RJ11 terminator plug, and a standard North American (Type B) 3-prong plug AC power cord