The new Easy-Laser BTA Digital 2 is the perfect tool for accurate sheave and pulley alignment. Mounted in a few seconds, immediately showing the offset and angle between the sheaves/pulleys, making it very easy to correct the misalignment with a "live" digital readout.

Features:

• Shows the parallel and angular misalignment between the sheaves with digital precision
• The adjustment values are always displayed live
• Much faster and more accurate than measuring with the earlier, conventional methods
• Digital readout for the same price level as for most of the existing systems/tools
• Alignment can be made by one operator
• Also suitable for non-magnetic sheaves

Download Data Sheet

Fits almost any type of sheave:

Magnetic reference surface on both transmitter and
detector for easy attachment to the sheaves

Easy-Laser D150 fits small as well as large sheaves

Easy To Use:

Easy-Laser BTA Digital 2 is attached in a few seconds (magnets) with the laser transmitter on one of the sheaves and the detector on the other. The transmitter generates a laser plane parallel to the reference sheave. The detector reads the position in relation to the laser plane and provides a live digital display of both offset and angular value. This makes the alignment of the adjustable machine very simple. The accuracy of the digital readout also means that you can align within prescribed tolerances and rely on the result.

Maintenance Means Savings:

In today's industry, preventive and predictive maintenance is a matter of course. When aligning with the Easy-Laser BTA you reduce the wear on sheaves/pulleys, belts, bearings and seals as well as reducing vibration.

This will give you less downtime, which of course means that you increase the available machine time. Time that guarantees your income. Increased efficiency also means large energy cost savings.

Transmissions with two or more belts, or wide belts, are highly affected by misalignment, causing large differences in belt tensions and also increased wear and tear on edges.

Measurement Procedure - It couldn’t be easier!

• Mount the laser transmitter onto the sheave of the reference machine and the detector unit vertically onto the sheave of the adjustable machine
  • Read the offset and angular values
  • Adjust when necessary

• Mount the detector unit horizontally and read the values
  • Adjust when necessary

Easy-Laser D150 is delivered with:

• Laser transmitter and detector
• Carrying case with contoured foam insert
• Extra batteries
• Manual