System D505 has all programs and functions needed for measurement of different rotating machinery. All parts of the system are designed and built for even the most demanding workplace and easy setup on any machinery. The versatile design solves all kinds of measurements quickly with precision. You can easily measure small and large machines regardless of the shaft diameter, with a resolution of 0.001 mm [0.05 mils] and with a measuring distance up to 20 m [66 feet] with optional extension cables( 2m with included cables).

Shaft Alignment + Vibration Measurement

The shaft alignment systems D505 and D525 have become even more universal, with the potential to measure vibration level (inch/s) and bearing condition (g-value). As before, the systems contain all programs and functions you could want for measurement and aligning different types of rotating machinery. Using a single instrument, you now have the potential to trouble-shoot, prevent wear and breakdowns in your machines. The display guides you through the entire measurement process.

The display unit has a storage memory for 125 alignments and RS232 port for printer (accessory) and PC connection (The Windows® program EasyLinkTM is included for measurement data transferring and data base function).

Features:

• Easy to use.
• Light Weight.
• Simple Soft Foot Measurement.
• Two visible red laser beams for rough and fine alignment.
• Displays horizontal and vertical values simultaneously on clear back lit screen.
• The screen guides the user through the alignment procedure.
• Measurement values are continuously updated in real time.
• Battery powered with long operating time.
• Built in spirit levels for easy positioning.
• Full labeling and storage of measurements Printer and computer communication port.
• Rugged construction to withstand rough environment.
• Wide measuring range.
• Universal shaft brackets.

Programs included in system D505:

   New Vibrometer 
   Shows vibration level in "mm/s" or "inch/s" and bearing condition value in "g".

   Horizontal 9-12-3 
   For the alignment of horizontal machines by the 9-12-3 method.

   Soft Foot
   With this program you check so that the machine is resting on all feet. Shows which foot should be corrected (if necessary)

   EasyTurnTM  
   For the alignment of horizontal machines. Allows complete measurement with only 40" rotation of the shafts.

   Cardan
   Shows the angular errors and adjustment value on cardan-shaft-coupled/center-offset machines. (Requires accessory fixtures.)

   Vertical 
   For measurement of vertical and flange mounted machines.

   Machine Train
   For the alignment of two to ten machines in a row (nine couplings). The entire alignment can be followed live on the screen.

   RefLockTM
   Any pair of feet can be locked/set as a reference. This is a sub-function in the machine train program.

   Thermal Growth Compensation
   Compensates for difference in thermal growth between machines. This is a sub-program in the machine train program.

   Offset and Angle
   Shows center offset and angular error between two shafts, for example. Also suitable for dynamic measurements.

   Values
   Shows live readings from S- and M-unit. Can be used for shaft alignment, straightness measurement and dynamic measurement. Up to four detectors can be connected in series and be zeroed individually.

Machine Train
For the alignment of 2 to 5 machines in a row. Shows the measurement values digitally and graphically in live during the alignment. With FeetLock function, which means that you can choose any two pair feet as locked (references), and also shift stationary and moveable machine. E.G. the values for the first and last pair of feet in the whole machine can be locked, and become the reference to which the machines are adjusted. The program is also perfect when aligning two machines.

D505 Data Sheet

EasyLink Software Data Sheet

Easy Link Software ALWAYS Free!
With EasyLink you can easily transfer measurement results from the display unit into the database, generate reports, or export the results into an Excel® spreadsheet for further analysis. The program supports a complete range of applications:

• Shaft alignment                                                 
• Straightness
• Linebore
• Square
• Parallelity (of rollers)
• Flatness
• Flange (i.e. slewing bearings)
• Plumbline etc.