The DCN-3000PS is an exceptionally small hand-held gauge with integrated probe for fast, practical and precise coating thickness measurement. It is ideal for the non-destructive testing of all electrically insulating coatings, such as varnish, paint, anodizing coatings on non-ferrous metals, also on stainless steel (eddy-current method).

• Dependable accuracy over the entire range of the gauge, not just at "calibration check" points.
• Measures to 0.01 mil (0.1 µm), automatically rounding off to the nearest 0.1 mil (1 µm).
• Keypad-selectable English or metric units.
• Continuous reading update detects soft coatings as probe tip "sinks" into them.
• Convient compact design Longer lasting, driftless calibration... Set it and forget it for long periods of time and from job to job
• Very reliable operation... Consistent, repeatable measurements
• NIST Certificate Included at no additional cost
• 1 Year Warranty

The 3000PS is supplied as a complete kit with

• 3000PS gauge
• Non-Ferrous zero plate,
• 2 calibration standards,
• 2 AAA batteries,
• Soft carrying pouch,
• Protective rubber shell,
• Mini screw driver,
• Instruction manual
• Calibration certificate

• Range 0 - 60.00 mils 0 - 1500 µm 
• Accuracy ±0.04 mils / 1µm + 1% of reading 
• Resolution
• Mils
• 0.00 - 9.99 mils:  0.01 mils
• 10.00 - 24.98 mils:  0.02 mils
• 25.00 - 49.95 mils:  0.05 mils
• 50.0 - 99.9 mils:  0.1 mils
• Microns (µm)
• 0.0 - 99.9 µm:  0.1 µm
• 100.0 - 249.8 µm:  0.2 µm
• 250.0 - 499.5 µm:  0.5 µm
• 500 - 999 µm:  1 µm
• 1.000 - 1.998 mm:  0.002 mm
• Display back-light, 4-digit alphanumeric, digit height 10mm 
• Minimum Measuring Area 0.2" x 0."2 (5 mm x 5 mm) 
• Minimum Curvature Radius
• convex: 0.12" (3 mm),
• concave: 0.2" (5 mm) 
• Minimum Substrate Thickness

  Non-Ferrous: 2 mils / 50 µm 
• Calibration factory calibration, zero calibration, foil calibration, offset-function: addition or subtraction of a constant value 
• Memory 80 readings 
• Statistics Program Number of readings, mean value, standard deviation, maximum and minimum reading of max. 10,000 readings 
• Set Limits Adjustable selectable with acoustic alarm system 
• Data Output Infrared IrDA Standard  
• Operating Temp. 32 °F to 122 °F / 0 °C to 50 °C 
• Surface Temp. 5 °F to 140 °F / -15 °C to 60 °C 
• Storage Temp. -4 °F to 140 °F / -20 °C to +60 °C 
• Power 2 AAA 1.5V 
• Dimensions 4" x 2" x 1" (99mm x 48mm x 24 mm) 
• Weight 3 oz (85 g) 
• Protection Class IP 52 (proof against dust and dripping water)  
• Standards DIN, ISO, ASTM, BS  
• Warranty 1 Year