Multi-purpose kit for easy and quick mounting and dismounting

The SKF Combo Kit, TMMK 10-35, comprising a total of 50 different components, is designed for quick, precise and safe mounting and dismounting of bearings with a bore diameter between 10 and 30 mm (0.4 - 1.2 in). For mounting, a multi-purpose fitting tool is included which is suitable for bearings as well as bushings, seal rings, belt pulleys and other similar products. For dismounting, a three-armed puller is included. This puller can be used for deep groove ball bearings with an interference fit on both rings or on the outer-ring without a shaft. All parts are clearly arranged in a practical transport case with a selection chart and instruction drawings.

Dismounting

• Puller arms made of high tensile alloy steel
• All arms provided with color codes for easy identification
• Hinged arms for optimal grip in bearing
• Elastic locking ring for easy connection of arms to spindle

Mounting

• Impact damage to bearings eliminated with fitting tools
• Rings and impact surfaces made of a super-tough acetal resin; resulting in high mechanical strength and fatigue and impact resistance at a very low weight
• Fiberglass handle on hammer for safe and ergonomic grip; absorbs shocks and vibrations

Selection chart TMMK 10-35

				D d
6000	M12	A1		A 10/26	A
6200	M12	A1	1	A 10/30
6300	M12	A3		A 10/35
6001	M12	A1		A 12/28
6201	M12	A2	2	A 12/32
6301	M12	A3		A 12/37
6002	M12	A1		A 15/32
6202	M12	A2	3	A 15/35
6302	M12	A3		A 15/42
6003	M12	A1		A 17/35
6203	M12	A2		A 17/40
6303	M16	A4	4	A 17/47
6403	M16	A5		B 20/52	B
6004	M12	A2		B 20/42
6204	M12	A3	5	B 20/47
6304	M16	A4		B 20/52
63/22	M16	A4		B 25/52
6005	M12	A2	6	B 25/47
6205	M12	A3		B 25/52
6305	M16	A5		B 25/62
63/28	M16	A5		B 30/62
6006	M12	A2	7	B 30/55
6206	M16	A4		B 30/62
6306	M16	A5		B 30/72
6007	M12	A3
6207	M16	A5
6307	M16	A5
6008	M12	A3
6208	M16	A5
6009	M12	A3
6209	M16	A5
6010	M12	A3
6210	M16	A5
6011	M16	A4
6211	M16	A5
6012	M16	A4
6013	M16	A4
6014	M16	A5
6015	M16	A5
6016	M16	A5
6017	M16	A5