| Designation |
TMHC 110E |
| Description |
Advanced hydraulic puller kit |
| Overall data: |
|
| Contents |
1 x arm-assembly stand
3 x arms, 70 mm (2.7 in)
3 x arms, 120 mm (4.7 in)
1 x separator set
1 x beam
2 x main rods
2 x extension rods, 125 mm (4.9 in)
1 x hydraulic spindle TMHS 100
2 x extension pieces for hydraulic spindle; 50, 100 mm (2.0, 3.9 in)
1 x nosepiece with centre point for hydraulic spindle |
| Maximum stroke |
80 mm (3.1 in) |
| Nominal working force |
100 kN (11.2 US ton force) |
| Weight |
13,5 kg (29.8 lb) |
| Cycle life hydraulic cylinder |
Minimum 5000 cycles up to 100 kN (11.2 US ton force) |
| Threading hydraulic cylinder |
UN 1½'' x 16 tpi |
| Safety valve setting hydraulic cylinder |
105 kN (11.8 US ton force) |
| Carrying case dimensions |
580 x 410 x 70 mm
(23 x 16 x 2.8 in) |
| Jaw puller: |
|
|
Effective arms length, arms set 1
(TMHP 10E-9) |
70 mm (2.7 in) |
| Width of grip, arms set 1 |
50-110 mm (2-4.3 in) |
| Claw dimensions |
a = 5 mm (0.2 in)
b = 15 mm (0.6 in)
c = 25 mm (1 in) |
|
Effective arms length, arms set 2
(TMHP 10E-10) |
120 mm (4.7 in) |
| Width of grip, arms set |
2 75-170 mm (3.0-6.7 in) |
| Claw dimensions |
a = 6 mm (0.2 in)
b = 15 mm (0.6 in)
c = 25 mm (1 in)
|
| Strong back puller: |
|
| Maximum reach |
255 mm (10 in) |
| Shaft diameter range |
20 - 100 mm (0.8 - 4 in) |
