Slide impact hammer assisted pullers

top right: TMSC 6  bottom right: TMSC 30-60

The SKF TMSC blind housing puller kits are ideal for removing bearings from housings that are difficult to reach with conventional pullers. The TMSC 30-60 kit is supplied with 3 different collets covering bore diameters from 30 to 60 mm (1.2 to 2.4 in).

• Easy removal of bearings in blind housings
• Positive bearing grip through collet expansion
• Prevents housing damage
• Six segment collets for efficient force application/transmission
• Supplied in a sturdy metal carry case

General instructions:

1. Insert the extractor through the bore of the bearing. 
2. Tighten the collet nut in order to expand the extractor behind the bearing.
3. Connect the slide hammer. Extract by throwing the hammer towards the handle.
   

Technical data:

• Shaft diameter range: 30-60 mm (1.2-2.4 in)
• Hammer displacement: 300 mm (12 in)
• Weight of hammer: 1,6 kg (3.5 lb)
• Total weight: 10 kg (22 lb)
• Dimensions of case: 585 x 235 x 90 mm (23 x 9.3 x 3.5 in)

Spare part ordering details

1	TMSC-2	Slide hammer complete
2	TMSC-14	Extractor ø 30-36 mm (1.2-1.4 in)
3	TMSC-15	Extractor ø 38-50 mm (1.5-2.0 in)
4	TMSC-16	Extractor ø 50-60 mm (2.0-2.4 in)