Search
Categories
Site Map
Knowledge Base
Resource Links
Extech-Direct
News Letters
Application Notes
Reliability Forums
(Your shopping cart is empty)
You are here: Home > Vibration > Vibration Monitoring Systems
Sort By:
Page of 1  
CMCP-530A Vibration Velocity Monitor
CMCP-530A Vibration Velocity Monitor - Ordering Page

The CMCP530 Accelerometer based Velocity Monitor is available in either "Peak" or "True RMS" signal detection versions and English or Metric scaling. The CMCP530 is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selectable range of 0.5, 1.0, 1.5, 2.0 and 2.5 in/sec (metric equivelant of 12.7, 25.4, 38.1, 50.8 and 63.5 mm/sec) with a 100 mv/g Input. Combining transmitters with an existing PLC or DCS system results in a high density, low cost vibration monitoring system.
CMCP-525A Vibration Acceleration Monitor
CMCP-525A Vibration Acceleration Monitor - Ordering Page

The CMCP525A Acceleration Monitor is available in either "Peak" or "True RMS" signal detection versions. The CMCP525A is compatible with all voltage output accelerometers, and provides a 4-20 mA output proportional to the overall measurement. Each unit provides constant current power for the accelerometer, checks for faults, processes the vibration signal to determine overall amplitude, and outputs a 4-20 mA dc current that is proportional to a user selected range of 5, 10, 15, 20 or 25 g's with a 100 mv/g Input.
Technekon CTD-1010 Vibration Switch
Technekon CTD-1010 Vibration Switch
Our Price: $650.00

GIL-3102 MINIMON Vibration Meter
GIL-3102 MINIMON Vibration Meter
Our Price: $650.00

Resolves issues where you have occasional vibration problems but don’t want to spend a lot of money but would like to keep track of problems.
CMCP-5301 Single Channel Complete Vibration Monitoring System
CMCP-5301 Single Channel Complete Vibration Monitoring System
Our Price: $1,195.00

One channel vibration monitor designed for use on rotating machinery such as motors, pumps and fans
  • Accept inputs from any industry standard 100 mV/g accelerometer

  • Measures overall vibration in terms of velocity - RMS detection

  • Digital display and visual alarm status indication

  • Analog 4-20 mA output for interface to a PLC or DCS for trending, alarm and operator interface

  • Alarm contacts for the OK circuit, and Alert and Danger for shutdown - a complete vibration protection solution

  • Pre-wired turn-key package with power supply - accepts 110 or 220 VAC, 50 or 60 Hz
CMCP-5302 Two Channel Complete Vibration Monitoring System
CMCP-5302 Two Channel Complete Vibration Monitoring System
Our Price: $2,195.00

Two channel vibration monitor designed for use on rotating machinery such as motors, pumps and fans
  • Accept inputs from any industry standard 100 mV/g accelerometer

  • Measures overall vibration in terms of velocity - RMS detection

  • Digital display and visual alarm status indication

  • Analog 4-20 mA output for interface to a PLC or DCS for trending, alarm and operator interface

  • Alarm contacts for the OK circuit, and Alert and Danger for shutdown - a complete vibration protection solution

  • Pre-wired turn-key package with power supply - accepts 110 or 220 VAC, 50 or 60 Hz
CMCP-5304 Four Channel Complete Vibration Monitoring System
CMCP-5304 Four Channel Complete Vibration Monitoring System
Our Price: $3,995.00

Four channel vibration monitor designed for use on rotating machinery such as motors, pumps and fans
  • Accept inputs from any industry standard 100 mV/g accelerometer

  • Measures overall vibration in terms of velocity - RMS detection

  • Digital display and visual alarm status indication

  • Analog 4-20 mA output for interface to a PLC or DCS for trending, alarm and operator interface

  • Alarm contacts for the OK circuit, and Alert and Danger for shutdown - a complete vibration protection solution

  • Pre-wired turn-key package with power supply - accepts 110 or 220 VAC, 50 or 60 Hz
CMCP-1000 Explosion Proof Single Channel Vibration Monitor
CMCP-1000 Explosion Proof Single Channel Vibration Monitor

Single channel vibration monitor with integral accelerometer in an explosion-proof housing
  • Complies with rigid API670 standards

  • Exceeds the capabilities of competitive vibration switches

  • Solid State Reliability

  • Two Levels of Alarm with Relays

  • True "OK" Circuitry with Relay

  • Remote Reset

  • Approvals: FM, CSA, UL Class I (BCD), Class II (E,F,G) Class III
   
 
Reliability Direct
2911 South Shore Blvd.
Ste. 170
League City, TX 77573
 About Us
 Become an Affiliate
 Privacy Policy
 Send Us Feedback