:
Dual Display with High/Low relay outputs
Features:
- Microprocessor for reliable, accurate measurement and control of pH from 0 to 14.00pH
- High and low set point adjustments on front panel for two independent 3A SPDT relays for ON/OFF controls, or to activate alarms, valves pumps or other equipment
- Front panel LEDs indicate HIGH/LOW alarm status
- Bright dual displays of pH (red LEDs) and temperature (green LEDs)
- Compact 1/16 DIN size saves panel space ? one quarter the space of a 1/4 DIN controller
- Automatic Temperature Compensation (ATC) provided using electrode assemblies with Pt-100 ohm sensors (see Self-Cleaning pH Electrode Kits)
- EEPROM memory protects settings in case of power loss
- Rear screw terminals for power, 2 sets of relays, Pt-100 ohm temperature input, and BNC connector for pH input. Includes panel mounting brackets
- Optional NEMA-4X gasketed lens cover fits over front bezel of controller ? made of watertight corrosion resistant ABS plastic
Accessories: Self Cleaning pH Electrode Kits (Includes electrode, cable and mounting assembly with ATC sensor)
Specifications
| Ranges |
0 to 14.00 pH and 0 to 100øC |
| Dual Relay Outputs |
3 Amp at 115 VAC |
| Temperature compensation |
Automatic 0-100øC via Pt 100? for pH |
| Resolution (Accuracy) |
0.01pH (0.01pH): 0.1øC (0.1øC) |
| Deadband |
0.00 to 2.55 pH adjustable |
| Panel Cutout (1/16 DIN) |
1.77x1.77" (45x45mm) Depth 4.7? (94mm) |
| Weight |
5 oz. (142g) |
| Power |
80 to 250VAC, 50/60Hz |
|
