Home > All Categories > Test & Measurement > pH Meters >

Extech 48VFL 1/16 DIN Temperature & Process Autotuning PID Controller
48VFL 1/16 DIN Temperature & Process Autotuning PID Controller
 
Fuzzy Logic PID, Auto Tuning, and Soft Start features combine for uncompromising, state-of-the-art control
  • Dual 4-digit LED displays of process and setpoint values
  • User friendly menus and tactile keypad for easy programming
  • One-touch autotuning for quick setup & precise control


Item# Item Name Our Price Qty Add
EXT-48VFL11 Extech 48VFL11 1/16 DIN Temperature PID Controller with one relay output
$199.99
EXT-48VFL13 Extech 48VFL13 1/16 DIN Temperature PID Controller with 4-20mA output
$229.19
Check the items you wish to purchase, then click


:
Fuzzy Logic PID, Auto Tuning, and Soft Start features combine for uncompromising, state-of-the-art control
Extech controllers now offer Fuzzy Logic enhanced PID and a Soft-Start feature that protects heaters from cold-starts. PID plus Fuzzy Logic tackles even the most demanding applications, eliminating over-shoot, unwanted process fluctuations, and drift. The Soft Start feature is ideally suited for processes, such as those employed in the Thermo-Plastics industry, where careful, exact, and slow heating of product is required.
Features:
  • Dual 4-digit LED displays for process and setpoint values
  • 1/16 DIN (48VFL) and 1/4 DIN (96VFL) model dimensions available
  • Easy programming & navigation with user-friendly menus and tactile keypad
  • Fuzzy Logic PID offers intuitive control simulating human control logic
  • Manual mode allows the user to override automatic control and drive the controller output higher or lower with the touch of a button
  • One-touch Auto Tuning for quick setup and stable, precise control
  • Two "Latching" Alarm relays standard with 8 Alarm modes plus advanced Timer modes
  • Single stage Ramp and Soak program with Ramp-to-Setpoint Limit that can be combined with the Soft Start feature for critical process demands
  • Accepts thermocouple and RTD inputs
  • Select desired temperature display units (øF or øC) from setup menu
  • Select thermocouple input type (9 selections) or RTD input (2 selections) from the display menu without the need for hardware modification
  • Complete with mounting bracket hardware and screw terminals for easy wiring
Specifications
Thermocouple

Inputs Type K -58 to 2498øF (-50 to 1370øC)

Type J -58 to 1832øF (-50 to 1000øC)

Type B 32 to 3272øF ( 0 to 1800øC)

Type T -454 to 752øF (-270 to 400øC)

Type E -58 to 1382øF (-50 to 750øC)

Type R or S 32 to 3182øF ( 0 to 1750øC)

Type N -58 to 2372øF (-50 to 1300øC)

Type C -58 to 3272øF (-50 to 1800øC)

PT100Ω RTD (DIN) -328 to 1652øF (-200 to 850øC)

PT100Ω RTD (JIS) -328 to 1202øF (-200 to 650øC)
Control/Alarm Relay 5 Amp @ 110V, SPST (resistive load)
DC Current Output 4-20mA (resistive); Impedance < 600 ohms
Accuracy Thermocouple: ñ1.8øF (1?ªC); RTD: ñ0.36øF (0.2?ªC)
Sampling Time Four (4) samples per second
LED Display Two 4-digit displays for Process Value, Setpoint, and programming modes
LED Status Alarm and Control output status
Control Modes
Fuzzy Logic enhanced three-term PID with Auto Tune
  • Proportional Band 0 to 300.0%
  • Integral time 0 to 3600 seconds
  • Derivative time 0 to 900 seconds
  • Hysteresis 0.0 to 200.0 or 0.0 to 2000
  • Cycle time 1 to 100 seconds
Front Panel Lexan construction, Drip/Dust proof; IR rating: IEC IP63
Power Supply 90 to 264 VAC; 50/60 Hz (< 5VA power consumption)

Ordering Information:
48VFL11 ....1/16 DIN Temperature PID Controller with one relay output
48VFL13 ....1/16 DIN Temperature PID Controller with 4-20mA output
96VFL11 ....1/4 DIN Temperature PID Controller with two relay outputs
96VFL13 ....1/4 DIN Temperature PID Controller with 4-20mA output






Browse for more products in the same category as this item:

All Categories > Test & Measurement > pH Meters
Manufacturers > Extech / Flir