Home > Vibration > Analyzers and Data Collectors >

Adash A4900 VIBRIO
Alternative Views:

Special Instructions: For Sale in the United States and Canada Only

Availability:: Usually Ships in 1 to 2 Weeks
Product Code: CMS-4900-VIBRIO



  • Powerful machine health checker
  • Vibration measurements in acceleration, velocity and displacement
  • FFT spectrum, time signal and wideband values measurements
  • Expert system for determining of unbalance, misalignment, looseness and bearing fault
  • Built-in stroboscope and non contact thermometer
  • Bearing condition measurement, including slow-running ones
  • Insufficiently lubricated bearings location
Operation of V 4900 Vibrio is so easy that anybody can learn it very quickly. We use traffic-light colors green, orange and red to display the status. Determination of individual machine or bearings defect types is done directly during operation, without a need to use a computer or software.
V 4900 Vibrio is an instrument with a completely new design, which, although small in size, is large in performance. Instruments in this cost-effective category have been able to measure only total vibration values so far. V 4900 Vibrio is revolutionary, because it can also measure and display FFT spectra and time records.
Completely unique are its methods for:
  • Automatic finding of revolutions
  • Automatic determination of a total machine status
  • Automatic determination of an operational status of a roller bearing.

V 4900 Vibrio is sold as complete set with a quality accelerometer, coiled cable, magnetic base, transit case and headphones. You can connect headphones to this instrument and listen to vibration signals. Do not consider this method obsolete! If you measure transmissions or slow-running bearings, you shall quickly understand its usefulness.
  • Input: 1 x ICP powered accelerometer with 100 mV/g sensitivity for measurement and recording
  • Output: 1x monoaural AC signal 8/0.5 W for external headphones
  • Measuring Ranges:
    • 10 Hz - 1000 Hz [mm/s]
    • 2 Hz - 200 Hz [mm/s]
    • 5 kHz - 16 kHz [g]
    • 1.5 kH - 16 kHz [g]
    • 0.5 kHz - 16 kHz [g]
  • Data Processing:
    • Measurement of effective values (TRUE RMS)
    • Measurement of peak values (TRUE PEAK)
    • Estimate of speed frequency (120 - 12000 RPM)
    • Spectrum analysis
    • Time signal
  • Display: Colored OLED display 128 x 128 pixels, diagonal 1.5" (38mm)
  • Measurement Range: Automatic, max. 80g peak for sensor 100mV/g, +/-12V peak AC
  • Power
    • 2x1.5V (AA size alkaline batteries) or
    • 2x1.2V (NiMH AA size rechargeable batteries)
  • Consumption: approx. 450 mA with headphones
  • Dimensions: 150x60x35 mm
  • Weight
    • 340 g including batteries (without cable, sensor and magnet)
    • 540 g including batteries, cable, sensor and magnet

Browse for more products in the same category as this item:

Vibration > Analyzers and Data Collectors
Manufacturers > Adash