 |
 |
 |
|
The
CMCP422VT-AC-01 is a Loop Powered Vibration Velocity Sensor with an integral armored cable (5m length) that
provide a 4-20mA output that is proportional to the overall vibration in
terms of velocity. The CMCP422VT continuously monitors machinery
health and and transmits directly to a PLC or DCS system for alarming,
trending and machine shutdown. The CMCP422VT is available with two
different ranges to meet your machines requirements.
Features
- Low Cost
- Vibration Velocity RMS or Peak Detection
- Integral 5 Meter Armored Integral Cable
- Rugged Design
- Loop Powered 4-20mA
- Interfaces Directly to PLC/DCS Systems
- Two Ranges Available
- Operating Temperature Range: -13 to +194° F (-25 to 90° C)
- 1/4" x 28 UNF Mounting Stud
- Optional Armored Integral Cable
Typical Applications:
Fans,
Motors, Pumps, Compressors, Centrifuges, Conveyors, Air Handlers,
Gearboxes, Rolls, Dryers, Presses, Cooling, HVAC, Spindles, Machine
Tooling, Process Equipment and many more.
| Technical Performance | | | Mounted Base Resonance | 5 kHz Min | | Velocity Range | 0-1.0 In/Sec RMS (0-25.4mm/Sec.) | | Frequency Response | 10 Hz to 1 kHz ± 5% - ISO 10816 | | Isolation | Base Isolated | | Measurement Range | 50 g peak
| | Transverse Sensitivity | Less than 5%
| | | | Electrical | | | Output Current | 4-20mA DC Proportional to RMS Velocity | | Supply Voltage | 15 to 30 VDC
| Settling Time
| 2 seconds
| Output Impedance
| Loop Resistance 600 Ohms Max @ 24VDC
| | Case Isolation | 10 to the 8th Power Ohms at 500 Volts
| | | | Environmental | | | Operating Temperature Range | -25 to 90 C (-13 to 194 F)
| | Sealing | IP67 | | Maximum Shock | 5000 g
| | | | Mechanical | | Case Material
| Stainless Steel
| Sensing Element
| PZT/Compression Type | | Mounting Torque | 70 Lb.-in | | Weight | 5.47 oz (155 g)
| | Mounting | 1/4"-28 UNF Mounting Stud (supplied with sensor)
| Cable
| Integral 5m Armored Cable, blunt cut
| | | | | | | | |
|
|
|
 |
|
 |
|