 |
The DT-311 Digital Stroboscope is a dual function stroboscope that provides the illusion of "stopped motion". By adjusting the strobe's flash rate, equipment and printing, objects appear to be standing still or in slow motion. Our strobes also measure rotational (RPM) or reciprocating (strokes per minute) speeds with the same precision as an electronic digital tachometer.
|
-
Manual flash controller knob
-
High flash rate (up to 35,000 FPM)
-
Microprocessor-controlled
-
Flash timer control
-
External trigger and Synchronous output |
Ideally suited for printing inspection, motion analysis, preventive maintenance and speed measurement of repetitive motion, our strobes provide timely data on vibrating parts, leaks, spray patterns and a variety of industrial and scientific operations. Don't be fooled - while the DT-311A stroboscope is extremely easy to operate via its lightweight and compact design, its rugged metal construction provides unequaled reliability in the harshest environments.
Features:
-
Highest accuracy and most stable flash rate(± 0.01% of reading)
-
Easy-to-read LED display Easy-to-operate controls
-
Detachable pistol-grip handle
-
Provides 12 V DC power for external sensors
-
Accepts external trigger input and provides synchronizing pulse output
-
Phase shift for best view and flash photography (timing, advance or delay in degrees or mSec)
-
Instant double and half-rate flash selection for error-free reading
|
Remove the handle and mount the strobe to the optional Flexible Swinging Arm (DT-300) |
|
Specifications
-
Update Time
-
Output Signal:
-
Display & Rate: Divide or multiply by 2, selectable
-
Operating Temperature: 32-104° (0-40°C)
-
Display: 5 digits, 10 mm high, red LED
-
Flashtube: Xenon, 10 W maximum
-
Flash Duration: 10-30 µs
-
Sensor Power Supply: 12 VDC ± 0.5V (50ma)
-
External Mode ONLY
-
Phase Shift:0 - 359° with 1° resolution or 0 - 333 ms from 200 - 3,000 FPM
-
Input Signal Req'd for External Triggering: 5-24 V P-P (not to exceed 35 V to GND) pulse width 50 µs minimum, rise time less than 0.2 ms
-
Input Impedance: 10,000 ohms
-
Power Requirements: 115 V or 230 V AC (specify), 50/60 Hz, 30 VA
-
Dimensions: 4.7 x 4.7 x7.2" (120 x 120 x 183mm)
-
Weight: 2.6 lbs. (1.2 kg)
|
|
 |