Home > All Categories > Thickness Gauges > Ultrasonic Thickness Gauges >

Check-Line TI-MMX-SDL Datalogging B-Scanning Ultrasonic Wall Thickness Gauge
Check-Line TI-MMX-SDL Datalogging B-Scanning Ultrasonic Wall Thickness Gauge
 
The TI-MMX-SDL is a full featured ultrasonic thickness gauge offering an oversized display as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values. The TI-MMX-SDL features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use.
Features
  • Equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform and Large Digits).
  • The time-based B-Scan feature displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
  • Built in hardware AGC gain control for through paint measurements in multi mode operation.
  • The TI-MMX-SDL has the ability to store 64 custom user defined setups. All factory setups can be selected, edited and saved to any setup location.
  • Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
  • Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view. The TI-MMX-SDL also comes complete with our Windows? PC software for transferring data to and from a PC.
  • The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material, and display the minimum measurement scanned.
  • CE Certified
  • Includes NIST Calibration Certificate
The TI-MMX-SDL is supplied as a complete kit with Supplied as a Complete Kit
note: transducer purchased separately
  • Gauge
  • 4 oz. bottle of coupling fluid
  • 2 AA batteries
  • NIST Calibration Certificate
  • Data transfer software
  • Serial output cable and Operating Instruction Manual
  • Foam-fitted carrying case


Item# Item Name Our Price Qty Add
ELE-T-104-0600SDL 1/2" dia 1.0 MHz Composite Transducer
$345.00
ELE-T-104-1000SDL 1/2" dia 2.25 MHz Transducer
$275.00
ELE-T-044-2000-SDL 1/2" dia 5.0 MHz High Temp (650F)
$370.00
ELE-T-104-2000-SDL 1/2" dia 5.0 MHz Transducer
$295.00
ELE-T-102-1000 1/4" dia 2.25 MHz transducer
$275.00
ELE-T-102-2700-SDL 1/4" dia 5.0 MHz alpha hi-damp transducer for through paint measurement
$320.00
ELE-T-102-3300-SDL 1/4" dia 7.5 MHz Transducer
$295.00
ELE-T-101-2000-SDL 3/16" dia 5.0 MHz Transducer
$250.00
ELE-TI-MMX-SDL Check-Line TI-MMX-SDL Datalogging B-Scanning Ultrasonic Wall Thickness Gauge PROBE NOT INCLUDED
$2,095.00
Check the items you wish to purchase, then click


Specifications :
  • Range in Steel:
    • Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
    • Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches).
    • Range will vary +/- depending on the thickness of the coating.
  • Resolution: .001 inches (0.01mm)
  • Velocity Range: .0492 to .3936 in./ms 1250 to 9999 meters/sec
  • Units: English & Metric
  • Measurement Modes:
    • Pulse-Echo (flaws, pits)
    • Echo-Echo (thru-paint)
  • Transducer Types: Dual Element (1 to 10 MHz).
  • Memory: 16 megabit non-volatile ram
  • Memory capacity: 12,000 pages with 1 reading and waveform per page
  • Power Source: Three 1.5V alkaline or 1.2V NiCad AA cells
  • Battery Life: Typically operates for 150 hours on alkaline and 100 hours on NiCad
  • Auto Power off: if idle 5 min
  • Display: 1/8 in. VGA grayscale display 62 x 45.7mm
  • Keyboard: Membrane switch with twelve tactile keys
  • Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
  • Operating Temperature: -14ø to 140øF (-10ø to 60øC)
  • Weigth, net: 383 grams
  • Dimensions: 63.5 W x 165 H x 31.5 D mm
  • Warranty: 2 year limited
  • Certification: CE Approved, Factory calibration traceable to national standards



Accessories for this product...
Check-Line TICC-MVX Protective Holder for Ultrasonic Gauges Check-Line USB-RS232-ADAP USB to Serial Adapter Check-Line SB-4L Steel Test Block - 0.040 , 0.060 , 0.080 , 0.100 inch
Our Price: $75.00

Add
Our Price: $25.00

Add
Our Price: $345.00

Add
Check-Line TICC-MVX Protective Holder for Ultrasonic Gauges Check-Line USB-RS232-ADAP USB to Serial Adapter Steel Calibration Test Block


Browse for more products in the same category as this item:

All Categories > Thickness Gauges > Ultrasonic Thickness Gauges