The
EASYTHERM 15 is a 12.8 kW induction heater used for the professional mounting of a range of parts including bearings, typically used in maintenance shops and production areas. The pivoting side-arm yoke is made to reduce the risk of damage and contamination, while increasing efficiency by ease of use and the "Turbo Boost" feature. This unit can handle bearing assemblies, and other parts, as small as 30mm inner ring to 150 kg with the appropriate configuration. A microprocessor controller allows the user to specify a temperature with accuracy of 2 degrees Celsius or use a timer, perfect to .01 seconds . All this, and a 3 year warranty, makes the EasyTherm 15 Induction Heater, an ideal choice for bearing housing installations.
"TURBO-BOOST" - In the horizontal position the part will heat up twice as fast.
The pivoting yoke has the great advantage that only the work piece is handled, because the arm does not have to be lifted manually. This avoids unnecessary handling and reduces the risk of dirt intruding into the bearing or work piece.
|
Size induction yokes mm |
Minimum Bore |
Maximum Outer Diameter |
Maximum Width |
Maximum Outer Diameter
with adapter yoke 70x70x150 |
Maximum Width
with adapter yoke 70x70x150 |
|
20x20x350
pivoting |
30mm |
460mm |
210mm |
760mm |
210mm |
|
30x30x350
pivoting |
45mm |
475mm |
210mm |
775mm |
210mm |
|
40x40x350
pivoting |
55mm |
485mm |
210mm |
785mm |
210mm |
|
50x50x350
|
70mm |
500mm |
210mm |
800mm |
210mm |
|
70x70x350
|
100mm |
515mm |
210mm |
815mm |
210mm |
|
60x60x350
|
85mm |
515mm |
210mm |
815mm |
210mm |
Advantages of TM Easy therm induction heaters:
-
Fast controllable heating process.
-
Safe heating process; only the work piece is heated.
-
Elimination of hot oil bath, no risk of localized overheating.
-
Suitable for sealed and shielded bearings.
-
Suitable for pre-greased bearings.
-
Suitable for bearings with polyamide cages.
Technical advantages of TM Easy therm induction heaters:
-
Manufactured according to the CE Regulations.
-
Fast heating process through high output; Cos phi > 0.8.
-
The heating coil is placed horizontal under the part;
-
By this it is impossible to damage the coil
-
This ensures an equal temperature all over the part (inner- and outer ring).
-
This makes it able to heat up parts with smaller bores.
-
All heaters are continuously useable without any optional cooling system.
-
Constantly monitoring heating process by probe and microprocessor.
-
Temperature control accuracy +/- 2°C.
-
Timer accuracy 0.01 sec.
-
Maintenance free.
-
Three years warranty.
-
Easy to use; user friendly design.
-
Ergonomic design (pivoting yoke principle).
-
Automatic power regulation, no manual pre-setting necessary.
-
Less than 2A/cm residual magnetism.
-
Voltage: 380-480V
-
Frequency: 50/60Hz
-
Power: 12.8kVA
-
Max. Temp.: 240/400°C
-
Weight of heater: 51kG
-
Dimensions of heater (lxbxh): 505x260x240
-
Width U-core: 210mm
-
Height U-core: 215mm
-
Induction yokes(mm): 23/30/40/50/60/70 (individually purchased)
-
Max.diameter of work piece: 560mm
-
Max. width of Work piece: 210mm
-
Max. weight of Work piece: up to 150kg (depending on Yoke)
