Home > Bearing Tools >

TMI-EasyTherm 3.5 Stationary Induction Bearing Heater
handles bearing assemblies up to 70kg with dimensions up to 600x180mm
 
Our Price: $4,852.00
Sale Price: $4,366.80
You save $485.20!


Product Code: TMI-EASYTHERM-3.5-HEATER
Qty:

Description Specifications
 
The Easytherm 3.5 is a powerful stationary microprocessor controlled induction heater with an ergonomic pivoting yoke. To be used for the professional mounting of a range of parts including bearings, typically used in maintenance shops and production areas. All FIVE Yokes are Included!
TURBO-BOOST - In the horizontal position the part will heat up twice as fast.


The pivoting yoke has the great advantage that only the work piece is handled, because the arm does not have to be lifted manually. This avoids unnecessary handling and reduces the risk of dirt intruding into the bearing or work piece.
Size induction yokes mm
Minimum Bore
Maximum Outer Diameter
Maximum Width
Maximum Outer Diameter
with adapter yoke 50x50x120
Maximum Width
with adapter yoke 50x50x120
10x10x280
non-pivoting
15mm
330mm
180mm
570mm
180mm
14x14x280
non-pivoting
20mm
345mm
180mm
585mm
180mm
25x25x280
pivoting
35mm
355mm
180mm
595mm
180mm
40x40x280
pivoting
60mm
360mm
180mm
600mm
180mm
50x50x280
pivoting

70mm

410mm

180mm

600mm

180mm

Advantages of TM Easy therm induction heaters:
  • Fast controllable heating process.
  • Safe heating process; only the work piece is heated.
  • Elimination of hot oil bath, no risk of localized overheating.
  • Suitable for sealed and shielded bearings.
  • Suitable for pre-greased bearings.
  • Suitable for bearings with polyamide cages.

Technical advantages of TM Easy therm induction heaters:

  • Manufactured according to the CE Regulations.
  • Fast heating process through high output; Cos phi > 0.8.
  • The heating coil is placed horizontal under the part;
    • By this it is impossible to damage the coil
    • This ensures an equal temperature all over the part (inner- and outer ring).
    • This makes it able to heat up parts with smaller bores.
  • All heaters are continuously useable without any optional cooling system.
  • Constantly monitoring heating process by probe and microprocessor.
  • Temperature control accuracy +/- 2øC.
  • Timer accuracy 0.01 sec.
  • Maintenance free.
  • Three years warranty.
  • Easy to use; user friendly design.
  • Ergonomic design (pivoting yoke principle).
  • Automatic power regulation, no manual pre-setting necessary.
  • Less than 2A/cm residual magnetism.


Browse for more products in the same category as this item:

Bearing Tools
Bearing Tools > Bearing Heaters
Manufacturers > TM Induction Heating