Home > All Categories > Thickness Gauges > Coating Thickness Gauges >

Check-Line 3000 Pro Series Coating Thickness Gauge with Memory and Wireless PC Interface
Coating Thickness Gauge w Memory
 
The 3000PRO Series coating thickness gauge is a multifunctional fully menu driven gauge for fast, professional and precise coating thickness measurement for:
  • Paint and electroplated coatings on iron and steel and other ferrous metals (DFN model)
  • Paint and anodizing coatings on non-ferrous metals and on austenitic stainless steels
The user will select one or more probes best suited for their application to connect to the 3000PRO gauge as all the probes are interchangeable and their internal calibration is stored within a small microchip inside the probe connector housing. This provides for quick and easy hot-swapping from one probe to any other in seconds.
Eight (8) separate probes are offered for a wide variety of applications.
Features
  • Automatic identification of the substrate
  • Highly wear-resistant measuring poles made of carbide metal
  • Special probes for unusual measurement tasks
  • Safe use even for special applications such as sand-blasted surfaces, small parts and curved surfaces
  • Scan mode for the quick recognition of coating thickness variations on large surfaces, including display of minimum and maximum readings
  • Display backlight for poor ambient lighting conditions
  • Online statistics with all statistical parameters
  • Extensive memory storage for recording of up to 10,000 data pints in up to 500 separate files "batches"
  • Alphanumerical file names can be used to identify each of the separate files "batches"
  • Infrared interface for wireless data transfer to printer and PC or via built-in RS-232
  • Includes FREE software for transferring data to a PC including histogram function
  • Optional high temperature footer for measuring on surfaces up to 150 C/302 F
  • Includes NIST-Traceable Calibration Certificate
  • 1 Year Warranty
Available Probes
Standard Probes
Range

F
0 - 60 mils (0 - 1500 m)
N
0 - 60 mils (0 - 1500 m)
FN
0 - 60 mils (0 - 1500 m)
90 Wand Probe for measuring hard to reach areas

FN90

0 - 60 mils (0 - 1500 m)

Micro Probe for very thin coatings

FN02

0 - 8 mils (0 - 200 m)

Probes for thick coatings

F35

F: 0 - 140 mils (0 - 3500 m)
N: 0 - 120 mils (0 - 3000 m)

FN35

0 - 140 mils (0 - 3500 m)

F10

0 - 400mils (0 - 10 mm)

"F" Probes measure Coatings on Ferrous Metals
"N" Probes measure Coatings on Non-Ferrous Metals
"FN" Probes measure Coatings on both Ferrous & Non-Ferrous Metals



Item# Item Name Our Price Qty Add
ELE-3000-HTF Check-Line 3000-HTF High Temp Footer (Not For F10 of FN90 Models)
$75.00
ELE-3000-IRP Check-Line 3000-IRP Infra-Red Printer for 3000 Series
$695.00
ELE-3000-IR-USB Check-Line 3000-IRP Infra-Red with USB for Data Transfer to PC
$175.00
ELE-3000-PTS Check-Line 3000-PTS Coating Thickness Gauge Test Stand
$495.00
ELE-3000-RS232 Check-Line 3000-RS232 DB9 Serial Cable to connect 3000PRO to PC
$95.00
ELE-3000-PRO Check-Line 3000PRO Coating Thickness Gauge (GAUGE ONLY)
$1,295.00
ELE-Probe-F Check-Line Probe-F Ferrous Probe (60 mils/1500 microns)
$395.00
ELE-PROBE-F10 Check-Line PROBE-F10 Ferrous Only (400 mils/10 mm)
$1,195.00
ELE-PROBE-F35 Check-Line PROBE-F35 Ferrous Only Probe (180 mils/3500 microns)
$995.00
ELE-PROBE-FN Check-Line Probe-FN Ferrous & Non-Ferrous Only Probe (60 mils/1500 microns)
$695.00
ELE-PROBE-FN02 Check-Line PROBE-FN02 Ferrous & Non-Ferrous Probe (8 mils/200 microns)
$1,095.00
ELE-PROBE-FN35 Check-Line PROBE-FN35 Ferrous & Non-Ferrous Probe(180 mils/3500 microns)
$1,195.00
ELE-PROBE-FN90 Check-Line PROBE-FN90 Ferrous & Non-Ferrous Only Probe ? 90 DEG Design (60 mils/1500 microns)
$1,495.00
ELE-PROBE-N Check-Line Probe-N Non-Ferrous Probe (60 mils/1500 microns)
$395.00
Check the items you wish to purchase, then click


Specifications :
  • Measuring principle:
    • Magnetic induction method (F-version);
    • Eddy current method (N-version)
  • Measuring range:
    • 3000PRO & 3000PRO-FN90: 0 - 60.00 mils 0 - 1500 m
    • 3000PRO-F10: 0 - 400 mils 0 - 10,000 m
  • Tolerance: (0.7 m/0.04 mils + 1% of reading)
  • Resolution:
    • mil
    • 0.00 - 9.99 mils 0.01 mils
    • 10.00 - 24.98 mils 0.02 mils
    • 25.00 - 49.95 mils 0.05 mils
    • 50.0 - 99.9 mils 0.1 mils
    • Microns (m)
    • 0.0 - 99.9 m 0.1 m
    • 100.0 - 249.8 m 0.2 m
    • 250.0 - 499.5 m 0.5 m
    • 500 - 999 m 1 m
    • 1.000 - 1.998 mm 0.002 mm
  • Display: 4-digit display (digit height 10 mm/0.4?) and 32 alphanumerical characters; switchable backlight
  • Minimum measurement area: 5 mm x 5mm/0.2? x 0.2?
  • Minimum curvature radius:
    • convex 2mm/0.08?;
    • concave 5mm/0.2?
  • Minimum substrate thickness: 0.2mm/8 mils (for F-versions); 50 m/2 mils (for N-versions)
  • Calibration methods:
    • Factory calibration: no calibration required for standard applications
    • Zeroing (1-point calibration): measurements on small geometries
    • Zeroing and foil calibration (2-point calibration): increased measuring accuracy
    • Two-foil calibration: especially for rough, sand-blasted surfaces
    • CTC: calibration on coated object if zeroing is not possible
    • Zero offset: addition/subtraction of a constant value to/from the reading
  • Limit values: Selectable; optical and acoustic signal if limit value is exceeded
  • Scan mode: For continuous measurements; for the quick recognition of coating thickness variations; with permanent display of minimum and maximum reading
  • Statistics:
    • Single-value statistics: n, avarage x, s, kvar, min, max, cp, cpk from max. 10,000 readings
    • Block-value statistics: n, avarage x , avarage s, avarage kvar , min, max, cp, cpk; block size 3 to 100 readings
  • Data memory: 10,000 readings in max. 500 selectable files; alphanumerical file names; stored readings and statistical values individually recallable
  • Interfaces: Infrared and serial RS232 interface
  • Language: Operator prompting and documentation in German, English, French (optional other languages)
  • Operating temperature: 0 C to 50 C/32 F to 122 F (storage temperature - 20 C to +60 C/-4 F to 140 F)
  • Surface temperature:
    • 5 F - 140 F / -15 C - 60 C (standard)
    • 5 - 302 F / 15 - 150 C (w/optional footer)
  • Power supply: 2 x round cell (AA) 1.5 V up to 60 hours of operating time
  • Housing/keypad: Protection class IP52 (protection against dust and dripping water)
  • Dimensions: Gauge: 140 mm x 62 mm x 30mm/5.6? x 2.5? x 1.2? (HxWxD)
  • Probe: dia. 14 mm x 83mm/dia. 0.56? x 3.3?
  • Weight: approx. 200 g/7 oz (gauge including batteries and probe)
  • Standards: DIN EN ISO, ASTM, BS
  • Warranty 1 Year
  • Calibration Certificate Included



Accessories for this product...
Check-Line 3000-PTS Coating Thickness Gauge Test Stand Check-Line 3000-IRP Infra-Red Printer for 3000 Series Check-Line 14-1068-1 Base Plate V-Grooved for Test Stand Check-Line USB-RS232-ADAP USB to Serial Adapter
Our Price: $495.00

Add
Our Price: $695.00

Add
Our Price: $75.00

Add
Our Price: $25.00

Add
Coating Thickness Gauge Test Stand Check-Line 3000-IRP Infra-Red Printer for 3000 Series Base Plate for holding cylindrical items Check-Line USB-RS232-ADAP USB to Serial Adapter
Check-Line 3000-HTF High Temp Footer (Not For F10 of FN90 Models)
Our Price: $75.00

Add
Check-Line 3000-HTF High Temp Footer (Not For F10 of FN90 Models)


Browse for more products in the same category as this item:

All Categories > Thickness Gauges > Coating Thickness Gauges
All Categories > Thickness Gauges
Manufacturers > Checkline / Electromatic