Home > Tachometers > Tachometer Sensors >

Monarch RLS24-P, Rugged Laser Sensor, 3m cable, Phone Plug connector
Monarch RLS-P, Rugged Laser Sensor with 3m cable, phone plug connector
 
Our Price: $303.00


Product Code: MON-6180-083-
Qty:

Description
 
Model RLS24-P: Rugged Laser Sensor with removable 3 meter cable, water tight M12 connector to 1/8" phone plug connector, mounting bracket with jam nuts and 12 inches of T-5 tape (10-24Vdc input power).

We’ve taken our hugely popular Remote Optical Laser Sensor (ROLS) and packaged it in a Rugged 316L SS IP67 rated enclosure. Although optical speed sensors require atmospheres that are clean and free of mist, steam, dirt, oil and other contaminants in order to function properly there are times when contamination can occur accidentally. Our Rugged Laser Sensor will survive these unintended episodes. Simply clean off the laser and detector windows and your up and running again. The RLS utilizes a water tight M12 connector that facilitates easy removal for cleaning. With an operating range of up to 25 feet, the RLS can be used in applications where close proximity isn’t convenient or safe. The laser light source makes setup incredibly easy. Simply aim the laser at a reflective tape or high contrast target and you’re ready to start measuring. The sensor has an on target Indicator built in to confirm that the sensor is detecting the target. The RLS is supplied with a 3 meter cable with choice of tinned flying leads or 1/8” phone plug connector for use with all of our portable tachometers and stroboscopes. You can also extend the cable length by adding our 25 foot extension cable(s).

FEATURES

  • Rugged IP67 package
  • 316L stainless steel housing
  • Up to 25 foot working distance
  • Standard TTL pulse output (other outputs available)
  • On Target Indicator
  • Measure up to 250,000 RPM
  • Includes mounting bracket and hardware
  • Includes 12” of reflective tape
  • Includes cable with integrated water tight M12 connector.
  • Choose flying lead or 1/8” phone plug connection
  • Compatible with all Monarch tachometers and stroboscopes

SPECIFICATIONS

Speed Range:

1-250,000 RPM

Illumination:

Visible Red Laser

Laser Specs: Classification: Class 2 (Per IEC 60825-1:2014) This product complies with IEC 60825-1 Ed. 3 and 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No 50 of June 2007

Maximum Laser Output: 1mW

Pulse Duration: Continuous

Laser Wavelength: 650nm

Beam Divergence: <1.5 mrad

Beam Diameter: 4x7 mm typical at 2 meters

Laser Diode Life: 8,000 operating hours MTBF

On Target Indicator:

Green LED (side mounted)

Operating Range:

Up to 25 feet (7.6m) and 60 degrees offset from target

Power Required:

RLS-W and RLS-P: 4-15Vdc +20%

RLS24-W and RLS24-P: 10-24Vdc ±20%

Output:

Standard: Positive pulse when target present. RLS: Output voltage = supply voltage, RLS24 output voltage = supply voltage less 5Vdc.

Optional: 3.3Vdc, Negative pulse, Open collector with internal pull up resistor to supply voltage. (contact factory)

Enclosure:

Material: 316L Stainless Steel

Dimensions: 0.787”(20.0mm) dia. X 4.00”(101.7mm) length

Rating: IP67

Connection:

Water tight M12 connector (at sensor) with 3 meter cable. Cable termination end can be ordered with 1/8” phone plug connector (-P) or with tinned leads (-w)

Accessories for this product...
MON-6180-069, T-5 Reflective Tape - 5 foot roll, 0.5 inch wide (2 pack)
Starts at $32.00

Add
MON-6180-069, T-5 Reflective Tape - 5 foot roll, 0.5 inch wide (2 pack)


Browse for more products in the same category as this item:

Tachometers > Tachometer Sensors
Manufacturers > Monarch Instrument