Home > Lubrication > Automatic Lubricators >

SKF LAGD 400 SYSTEM MultiPoint Lubricator
SKF LAGD 400 SYSTEM MultiPoint Lubricator
Our Price: $1,893.57

Availability:: Call to Check Availability
Product Code: SKF-LAGD 400


Multiple grease lubrication points made easy

The lubrication of bearings with the correct type and quantity of grease is essential for trouble-free operation. Research has shown that 36% of all bearings fail prematurely due to incorrect lubrication. Especially for installations with multiple lubrication points, this can be a time-consuming and costly process. The SKF LAGD 400, SYSTEM MultiPoint, centralized automatic lubricator, is the most user-friendly and cost-effective automatic lubricator for multiple grease lubrication points available today. Its compact design, combined with electronically controlled accuracy, makes it an excellent solution for longer bearing-life and increased uptime of your machinery.

Being a do-it-yourself lubrication system, SYSTEM MultiPoint can be easily installed without the assistance of a costly lubrication service company and requires no special training to use. Once the correct grease dispense rate for your application is calculated using DialSet, SKF's re-lubrication calculation program, SYSTEM MultiPoint will keep up to eight lubrication points simultaneously and automatically lubricated, preventing both over and under-greasing. The transparent cartridge housing allows for easy inspection, while an electronic alarm will warn you when the grease cartridge is empty.
  • Do-it-yourself centralized lubrication system
  • Up to 8 feed lines
  • Easy-to-use DialSet included: SKF's re-lubrication calculation program allowing accurate calculation of the correct re-lubrication intervals
  • Long feed lines (maximum up to 5 m/16 ft)
  • Electronic setting and read-out of control parameters
  • Alarm function for blocked feed lines and empty cartridge
  • Machine steering (i.e. lubricator only operates while machine is running)
  • High pressure capability (40 bar / 600 psi)
  • Tested and approved with all SKF greases
  • Uses standard SKF grease cartridges (420 ml)
  • Ready for use, all accessories included

Download Datasheet
Download User's Manual
View Product Video

Technical data

  • Content:
    • 8-outlet lubricator
    • 20 m tubing
    • Quick connectors for application side
    • 2 Y-connectors
    • LGMT 2/0.4 grease cartridge
    • SKF's DialSet program
  • Number of feed lines: 1 - 8
  • Maximum pressure: 40 bar (600 psi)
  • Suitable grease: NLGI 1, 2 and 3
  • Maximum length of feed-lines: 5 m (16 ft)
  • Ambient temperature: 0 - 50 C (32 - 120 F)
  • Drive mechanism: Electro-mechanical
  • Volume: 0.1 - 10 cm3/day (0.003 - 0.35 US fl. oz/day) per outlet approx. 0.6 - 65 g/week (0.02 -2.3 oz/week)
  • Power: 110-240V AC, 50-60Hz or 24V DC
  • Alarms: Blocked feed lines, empty cartridge; internal and external
  • External steering: External relay steering
  • IP rating: 54
  • Lubrication tubes: 20 m (65 ft), Nylon, 6 x 1.5 mm (1/4 x 0.06 in)
  • Connection thread: G 1/4
  • Height: 510 mm (20 in)

Browse for more products in the same category as this item:

Lubrication > Automatic Lubricators