The 729101 series of SKF Oil Injection Kits are suitable for many applications using the SKF Oil Injection Method. Each kit contains an SKF Oil Injector complete with a high pressure pipe, pressure gauge, adapter block and a range of connection nipples.
The SKF oil injection kit is used for pressure joints of all sizes and applications, such as propellers, rolling bearings, couplings, gears, pulleys, wheels, flywheels, where the surface pressure is less than 350 N/mm².
The adapter block 226402 makes it possible to connect a high pressure pipe and pressure gauge to the SKF oil injector 226400 E (alt. 226400 E/400). The design of this adapter block assures a correct positioning of gauge and injector and offers several possibilities of working position, such as on the floor, fixed in a vice or with a G-clamp.
The oil injection kits contain an oil injector, 226400 E series,
complete with high pressure pipe, pressure gauge, adapter block and a
range of connection nipples all packed together in a sturdy plastic
carrying case.
-
Complete high–pressure kits, including oil injector, pressure gauge, 2,0 m high–pressure pipe and a range of connection nipples
-
Oil container capacity 200 cm³ (12.2 in.³)
Contents List:
| Designation | 729101/300MPA | 729101/400MPA | Oil Injector
| 226400 E
| 226500E/400 | Adapter Block
| 226402 | 226402 | High Pressure Pipe
(G3/4 - 1/4)
| 227957 A
| 227957 A/400 MP
| Connection Nipple
(G3/4 - 1/8)
| 1014357 A
| | Connection Nipple
(G3/4 - 1/2)
| 1016402 E
| 1016402 E
| Connection Nipple
(G3/4 - 3/4)
| 228027 E
| 228027 E
| Pressure Gauge
| 1077589 (0 - 300 MPa)
| 1077589/3 (0 - 400 MPa)
|
|
|