Home >

TMHS 75 Hydraulic Spindle for EasyPull
TMHS 75 Hydraulic Spindle
Our Price: $655.17

Availability:: Call to Check Availability
Product Code: SKF-TMHS 75


SKFTMHS 75 Hydraulic Spindle

The SKFTMHS 75 hydraulic spindle generate a high pulling force with very little effort compared to the standard mechanical spindles. They dramatically reduce the time needed to dismount a bearing or other component. The spindles are equipped with integrated hydraulic pumps for force generation. Maximum pulling forces are limited by special safety valves and the hydraulic oil will remain inside the pump


  • Integrated hydraulic cylinder, pump and spindle - no separate pump is required
  • Safety valve helps prevent overloading the spindle and the puller in case excessive force is applied
  • Spring-loaded center point in the nosepiece allows easy centring of the puller on the shaft without damaging shaft center
  • Hand lever with ergonomic grip can be rotated 360
  • Hardened and chrome plated piston with spring return function
  • Extension pieces included allows easy adaptation for the required pulling length

What's Included:

  • 1 Hydraulic spindle
  • 2 Extension pieces
  • 1 Nosepiece

Data Sheet


Technical data
Extension Pieces Measurement(2 Pieces) 50 and 100 mm(2.0 and 3.9 in.)
Maximum withdrawal force 75 kN (8,4 ton US)
Piston stroke 75 mm (3.0 in.)
Body thread UN 11/4 12
Nose piece diameter 35 mm (1.4 in.)
Maximum reach 229 mm (9.0 in.)
Weight 2.7 kg (6.0 lb)
SKF force generator selection
Standard with puller TMMA 75H
Accessory for puller TMMA 80