Home > All Categories > Electrical Solutions > Clamp Meters >

TPI-275 True RMS Digital Clamp Meter
TPI-275 True RMS Digital Clamp Meter
 
Our Price: $149.95


Product Code: TPI-275
Qty:

Description
 
AC Amps ...400
DC Amps ...400
Frequency ...40 MHz
Capacitance...4,000 uF
Temperature...1,000 F
AC Volts...600
DC Volts...600
Resistance...40 Meg Ohm
Basic DC accuracy...0.5%
  • True RMS 400 Amps AC/DC
  • Measure motor in-rush current and run current
  • Measure temperature differential using relative mode
  • Non-contact voltage (NCV) feature to see if power is being supplied to the 24 VAC control circuit
  • Up to 4,000 microfarads to test motor start and run capacitors
  • Frequency, Min/Max/Record, Data Hold and Peak Hold
  • 11,000 count display with 41 segment analog bargraph
  • CAT III 600V rated
  • cULus 61010
  • 3-year limited warranty


Data Sheet

Instruction Manual

275 Specifications
DC Voltage Max Range:600V
Max Resolution:0.1mV
Basic Accuracy: 0.5%
AC Voltage Max Range:600V
Max Resolution:0.1mV
Basic Accuracy: 1.2%
DC Amps Max Range:400A
Max Resolution:0.1A
Basic Accuracy: 3%
DC Microamps Max Range:1100uA
Max Resolution:0.01uA
Basic Accuracy: 0.8%
AC Amps Max Range:400A
Max Resolution:0.1A
Basic Accuracy: 3%
Resistance Max Range:110MΩ
Max Resolution:0.1Ω
Basic Accuracy: 1%
Frequency Max Range:110MHz
Max Resolution:0.1Hz
Basic Accuracy: 1%
Capacitance Max Range:110mF
Max Resolution:0.001nF
Basic Accuracy: 3%
Temperature Max Range:1000øF
Max Resolution:1øF
Basic Accuracy: 1%
Non-Contact Voltage (NCV) 24VAC and above
Continuity Buzzer <35Ω
Diode Test 1.5mA Max
True RMS Response Yes
Peak Hold Yes
Relative Mode Yes
Min/Max Record Yes
Data Hold Yes
% Total Harmonic Distortion No
Range Selection Auto / Manual
Display Type 11000 count LCD
Operating Temperature 32øF to 104øF
Relative Humidity 80% non-condensing
Storage Temperature 14øF to 122øF
Battery Type 9V (MN1604)
Battery Life 80hrs typical
Auto Off / Sleep Mode Yes
Dimensions (H x L x W) 1.3? x 10? x 2.5?
Weight 0.8lb
Agency Approval CE IEC 61010: CAT III, 600V
cULus 61010

275 Applications
Measure flame safety control current
Test start and run capacitors & motors
Measure motor run current and capture peak motor start up and amperage
Measure heat anticipator current
Determine thermocouple voltage
Test line and control voltage
Measure heating element resistance
Measure air temperature in ducts
Test for the presense of voltage in circuits without contacting the circuit
Measure temperature differential using relative mode



Browse for more products in the same category as this item:

All Categories > Electrical Solutions > Clamp Meters
Manufacturers > Test Products International