Conemount Model C (BH-02-C2) Bearing Heater for 3/4" to 5-3/4" Bearings - 220V

• Aluminum cone allows fast, even heat transfer for a wide range of bearing sizes
• Simple operation, simply mark bearing with temp crayon and remove when mark melts - no need for complex manuals or training courses
• Lightweight, portable heaters can easily be moved to equipment being serviced
• Simple, innovative design requires minimum maintenance
• No danger of contamination or damage and won't harm bearings, seals, lubricants or shafts

Flexible - Each unit is designed to heat a wide a wide range of bearings

Portable - Each unit weighs 17 lbs. or less so it can easily be moved close to the equipment being maintained.

Non-Magnetizing - Each current is not applied to the bearing. Resistance elements heat the unit, which in turn heats the bearing, preventing magnetization.

Affordable Cone - Mounter units are priced economically for maintenance and repair operations.

Easy to Use - Simply follow the short instruction guide. No complex manuals or training are necessary.

Reliable - The simple design of Cone Mounter units promotes a long life. Units are warranted for one year.

Operating Tips

During Mounting

• Handle bearing carefully.
• Protect the bearing from dirt and contamination.
• Be certain the bearing is seated properly on the shaft.
• Monitor bearing temperature closely - do not overheat

During Operation and Maintenance

• Properly lubricate the bearing.
• Avoid excessive heat.
• Avoid excessive vibration.
• Protect from other operations, i.e., steam cleaning, welding, etc
• Protect from stray electrical current.
• Never use near materials which may burn.